Thermage vs. InMode: Sagging Skin or Chin Fat?
Lifting

Thermage vs. InMode: Sagging Skin or Chin Fat?

Thermage and InMode both use RF heat, but Thermage covers the dermis in one session while InMode switches handpieces for skin and fat. Here's how to choose by sagging and chin fat, what studies found, and which reactions need a call.

Not sure if this applies to you?Photos and articles only go so far. Our English-speaking team can talk it through, and the plan is decided in person.* English-speaking staff on site · ask directly on WhatsAppAsk the doctor

Pick Thermage if your main worry is loose skin, and look at InMode if sagging comes with fat under the chin or along the jaw. Both use radiofrequency (RF) heat, but Thermage spreads it across a wide area of the dermis in one session, while InMode switches handpieces to work on the skin and the fat beneath it separately.

So the real question isn't which machine is stronger. It's whether your concern is mostly thin, stretched skin or skin plus extra fullness underneath. In this article, we'll cover where each one puts its heat, what one Thermage session and a series of InMode Forma sessions did in studies, how the Forma and FX handpieces differ, which reactions are normal, and how either one fits a trip to Korea.

Quick summary

  • Thermage is one-session monopolar RF for loose skin; InMode is bipolar RF with interchangeable handpieces for skin and fat.
  • Benchmark: Thermage research centers on a single session, while the InMode Forma chin study used 4 sessions 2 weeks apart, with changes showing from the 2nd to 3rd session.
  • If fat under the chin is part of the problem, the InMode side of the research is closer to your situation.
  • Blisters, oozing, or a dented spot after either treatment means you should contact the clinic right away.

Thermage vs. InMode: Which Layer Does Each One Heat?

Thermage heats the dermis in one broad layer, while InMode heats the tissue caught between two electrodes. That difference in how the current travels is what decides the rest.

Thermage is monopolar RF. Energy leaves the treatment tip, passes through your body, and returns to a pad placed on your skin, so it can reach fairly deep. As the tip touches your face, a cooling spray chills the surface to protect the outer layer of skin*.

*Based on the US FDA 510(k) clearance summary for the Thermage FLX System, an FDA-cleared device.

InMode is one platform with several handpieces. In this article we focus on two of them: Forma, which heats the skin, and MiniFX, a smaller handpiece from the FX family made for fat. MiniFX gently suctions a fold of skin and fat, then runs RF between two electrodes inside that cup. The skin surface is kept at a maximum of 41°C (±2°C)*.

*Based on the US FDA 510(k) clearance summary for the InMode MiniFX handpiece.

ComparisonThermage (FLX)InMode (Forma, MiniFX)
RF typeMonopolar, returns through a padBipolar, between two electrodes
Main targetWide area of the dermisSkin, and suctioned fat with MiniFX
Sessions in studies14, every 2 weeks
What studies measuredEye wrinkles, brow positionChin sagging, fat volume
Closer fit forLoose, thin skinSagging plus chin fat

Both are meant to heat tissue so your skin builds new collagen over time. Rather than memorizing depths in millimeters, it's easier to remember this: Thermage covers a wide surface at once, and InMode splits the job by handpiece. Whether you'd rather come in once or can return every 2 weeks matters too.

Skin cross-section showing Thermage heating a wide dermis layer and InMode heating tissue between two electrodes

Is Thermage FLX Better for Loose, Sagging Skin?

Thermage FLX is the closer match when the skin itself has loosened. In a survey of 52 Korean skin doctors, skin thickness was named the most important factor in how well someone responds to Thermage FLX. That's why we start by gently pinching the cheek and jawline to check how thick and how loose your skin is.

Results build slowly after one session. When 86 people had a single session with an early Thermage device and were followed for 6 months, 83.2% of treated eye areas improved by at least 1 point on a wrinkle score, and 61.5% of brows rose by 0.5 mm or more. Yet only 50% said they were satisfied with the result. Skin tightened a little right away, then kept firming as it healed, so a dramatic one-day change isn't a realistic expectation. Individual results vary.

If your cheeks are already slim and the issue is mostly crepey, stretched skin, adding a fat-focused handpiece may not be what you need. That's the case where a one-session approach like Thermage FLX makes the most sense to compare first.

A doctor pinching cheek skin to check how thick and loose it is before choosing Thermage

InMode Forma vs. FX: Which Fits Chin and Jowl Fat?

For a soft double chin with sagging, InMode Forma has the more relevant data. In a study of 22 people with loose skin under the chin, Forma was done 4 times, 2 weeks apart. Laxity scores improved meaningfully from the 2nd session and the doctors' ratings from the 3rd, and fat volume under the chin stayed lower from 1 week to 6 months afterward. It was a small study with no comparison group, so take the numbers as a guide, not a promise. How much you see depends on your skin.

Forma is the heating handpiece for skin, while the FX handpieces add suction to work on fat. Most fat data for that design comes from the body, not the face. In 20 women treated on the belly with a similar body handpiece (BodyFX), ultrasound showed fat thickness was 39.6% lower on average after 3 months. That figure can't be carried over to the face, and the US clearance for MiniFX covers temporary relief of muscle aches and a temporary improvement in how cellulite looks. It doesn't include fat reduction.

At the visit, we pinch the cheeks and the area under the chin to judge how much fat is there. That decides whether a fat-focused handpiece is worth adding or whether Forma alone fits better.

Side view of sagging skin and fat under the chin, the area studied with InMode Forma over 4 sessions

Thermage and InMode Side Effects: What's Normal, What's Urgent?

Redness right after treatment is the reaction you should expect, and it fades. In the 22-person Forma study, nearly everyone had temporary redness that settled, with no serious side effects. In the 86-person Thermage study, swelling and redness were uncommon and short-lived.

Second-degree burns (blisters) are rare but reported. They appeared in 0.36% of 5,858 Thermage pulses in the 86-person study. With an older 1 cm² tip, 290 patients had burns in 2.7% of sessions, and scarring, dents from fat loss, and nerve pain were also rare in that group. A review of RF device studies found that most complications were mild and temporary, and that major ones were more common with monopolar devices than bipolar ones.

Contact the clinic right away, rather than waiting a few days, if you notice any of these:

  • Blisters or oozing
  • Crusting or skin turning darker
  • A dented or sunken spot where you were treated
  • Burning or tingling pain that doesn't go away

If redness spreads, or you develop a fever or worsening pain, seek medical care right away.

Checklist separating normal redness from blisters, dents, and lasting burning pain that need a call

Thermage or InMode Within Your Travel Itinerary in Korea

Unless you had sedation that day, there's no reason to push back your flight because of Thermage or InMode. If you're weighing InMode Forma, keep in mind that the study schedule was 4 sessions 2 weeks apart, which is hard to finish on a short trip. Thermage's single-session format is easier to fit into one visit.

It also helps to know what one visit can do. Some treatments, like filler, change your shape the same day. RF tightening isn't one of them. It tends to bring your skin a little closer to how it used to look, gradually, rather than changing everything at once.

Once you're home, you can send photos through the consultation button on this page if something worries you. If a reaction looks serious, like blisters, a dent, or spreading redness, see a local doctor first instead of waiting for a reply.

Travel calendar comparing one Thermage visit with InMode Forma sessions spaced 2 weeks apart

The Bottom Line: What a Thermage or InMode Quote Should Show

A Thermage quote should list the tip type and total shot count, and an InMode quote should name the handpiece and the number of sessions. Without those, you can't compare one clinic's plan to another's.

  • Thermage: tip size, total shots, and how they're split between cheeks, jawline, and eyes
  • InMode: Forma, MiniFX, or both, how many sessions, and how many weeks apart
  • Both: the treatment area and any lifting treatments you've had in the past year

Before you decide, ask: "For my sagging and the fat under my chin, which one fits better?" That single answer makes the two easier to compare. Beautystone is a clinic in Seoul's Hapjeong area. When you reach out, include a front and side photo of your face, plus the name and date of any recent lifting treatment.

References

Frequently Asked Questions

Q. Why does Thermage feel so hot during treatment?

A. Thermage feels hot because the RF energy creates heat inside your skin, not on top of it. The surface is cooled while the deeper layer warms up, so you feel a burst of heat each time a pulse goes in. That heat is what's meant to trigger collagen changes, and the setting is adjusted as your skin responds.

Q. What's the Thermage FLX pain level?

A. Thermage FLX felt more painful than the older Thermage CPT to 25.5% of doctors in a survey of 52 Korean skin doctors. How much heat and discomfort you feel depends on the area and the setting. Numbing cream or another option is chosen at the visit based on the area and how sensitive you are.

Q. Thermage FLX vs. Thermage CPT: what's the difference?

A. Thermage FLX is the newer device built on Thermage CPT technology. In the same survey of Korean doctors, 57.4% said FLX was more effective and 66.0% said treatment took less time. It's an upgrade of the same monopolar approach, not a different kind of treatment.

Q. How often should Thermage FLX be repeated?

A. The most common answer for repeating Thermage FLX was once a year, given by 51.9% of doctors in a survey of 52 Korean skin doctors. That's a common practice, not a fixed schedule. The next session is planned by checking how your skin thickness and looseness changed since the last one.

Q. Which Thermage FLX tip do doctors use most?

A. The 4 cm² tip with 600 pulses was the choice of 86.5% of Thermage FLX users in a survey of Korean doctors. Tip size and shot count change how widely and how much the face is covered, so it's worth checking both on any quote.

Q. Can I get Thermage and InMode at the same visit?

A. We couldn't find studies comparing the order or spacing of Thermage and InMode done together. So the first step is telling us whether loose skin or chin fat bothers you more, and when you had your last treatment. The order and spacing are then decided together at the visit.

Q. Can I get RF skin tightening if I have darker skin?

A. RF skin tightening can be done on darker skin because the heat it creates doesn't depend on skin color. It doesn't rely on pigment absorbing light the way many lasers do. The Forma study under the chin also noted it can be used on any skin type.

Latest Posts

Follow us on Instagram

@beautysdoctors